The Braemac Embedded Board range

SBC82820

Socket 478 Intel® Pentium® M PCI CPU Card with DualView, Dual Ethernet and DVI

Introduction
The SBC82820 is a PICMG v1.0 compliant half-size PCI bus CPU card which supports Intel® Pentium® M and Celeron® M processors with a 400/533MHz front side bus. This slot CPU card is equipped with two DDR2 SODIMM sockets which provide maximum up to 2GB system memory capacity. For large size LVDS LCD compliance, the SBC82820's LCD interface is through SDVO port of the integrated graphic controller with LVDS transmitter to support single and dual channels 24-bit LVDS signal interface. In the meanwhile, on the edge of the I/O outlet, it also provides DVI-I interface for both CRT and DVI-D displays. By these display interfaces, the singe board computer can perform fully DualView features configured as CRT plus LVDS or CRT plus DVI-D or DVI-D plus LVDS types. Taking the advantages of ICH6M's rich integrated I/O functions, the PCI bus slot CPU card provides two onboard PCI Express x1 bus Gigabit Ethernet ports, one PATA-100 port, two SATA-150 ports, DMA CompactFlash™ type-II socket, 4 USB 2.0 ports, AC'97 Audio with amplified, and SMBus for customized monitor/control interface.

Features
• Socket 478 for Intel® Pentium® M and Ultra low power fanless Intel® Celeron® M processors
• DualView with different content & resolution
• SATA-150 supported
• Dual Ethernet as Gigabit LAN
• RoHS compliant

Ordering Information
• SBC82820VGGA
SBC82820 with Socket 478, DVI, Dual Gigabit Ethernet and Audio
• SBC82820VGGA-1GE
SBC82820 with Celeron® M 1GHz/ZC, DVI, Dual Gigabit Ethernet and Audio
• ATX6021/4
4-slot passive backplane
• ATX6021/5
4-slot passive backplane
• DVI adapter
DVI-to-CRT & DVI Y-cable
• CK9A003
1 x Audio cable with Game port, 4 x USB 2.0 cable